国产精品又长又粗又爽又黄的毛片, 国产AV无码专区亚洲AV毛片搜, 丰满人妻被猛烈进入中文字幕四川, 国产精品一区二区三区国产女人喷,亚洲国产欧美日韩图片在线人,潘娇娇337p人艺体艺术,成人免费无码大片a毛片古装,一本到高清视频免费,人妻在线视频免费看

Key
Responsibilities工作職責：
1. 公用設施系統的日常監控、故障現場確認、狀態匯報和維修。EMS/BMS系統的日常監控依據SOP 的要求報警響應及匯報，日志記錄及管理。Daily utility’s monitoring/problem on site
confirmation/status reporting/repair. According as SOP requirements to
monitor & control the EMS/BMS systems, response the alarm and take
corrective action, reporting and updates the information, logbook recording
and management.
2. 保持對潔凈系統和潔凈室的關鍵參數的持續監控，報警響應，糾正和預防措施，確保關鍵參數均在標準范圍內其符合GMP的要求。比如溫濕度，壓差，微生物，塵埃粒子和其他根據重要性的分析評估被定義為的關鍵指標。Keep monitoring and controlling the key parameters for clean
utilities, alarm response, take corrective and preventive action, and make
sure they are all in a certain range and compliant with GMP requirements.
Such as temperature & humidity, microbial, particulate, dew point, oil
content, bacteria, temperature, and all those defined as critical indicators
based on criticality assessment.
3. 嚴格執行設備日常巡檢及預防性維護，在日志中記錄各項參數及發現的問題。Strictly carry out equipment daily inspection, record all parameters
or findings in logbook.
4. 動力設備日常切換及故障處理，應急情況的設備緊急啟動，包括電力系統和公用系統。Power supply equipment routine switch and fault handling and emergency
start actions operation, including the electric system and utility system.
5. 執行工廠內電氣系統，暖通空調，公用系統，潔凈室和冷庫日常巡檢、預防性，維護保養工作。Implement the routine inspection, preventative maintenance and
predictive maintenance for the site electrical system, HVAC system, clean
utility system, clean room and cold room.
6. 基于固定周期，狀態的公用系統維護包括制冷機組，壓縮機，純化水機組，廢水處理設備，組合式空調機組，蒸汽鍋爐，電加熱設備，冷卻塔等。 Utility system maintenance includes time & condition based for
the chillers, compressors, PW generation & distribution system, air
handling units, boilers, and electric heater equipment, cooling towers, etc.
7. 日常的化學品溶液配置，軟化床加鹽，設備及管道表面清潔，按規定周期進行前處理及反滲透裝置消毒，按規定周期進行純化水儲罐及循環管路消毒，按規定周期更換過濾器及紫外燈等耗材，協助QC取水樣等。Routine chemical solution preparation, re-filling of industrial salt
for softener, Clean on the pipes and equipment surface, Carry out sanitation
on the pre-treatment and RO units as scheduled, Carry out sterilization on
the purified water storage tank and circulation loop as scheduled, Change
filters, UV tubes and etc. as scheduled. Co-operate with QC water sampling.
8. 負責廢水系統的水質取樣，廢水系統的運行操作，確保廢水系統連續運行，廢水經過處理合規排放。Responsible for water quality sampling of wastewater system, operation
of wastewater system, ensure continuous operation of wastewater system,
wastewater treatment and compliance discharge.
9. 負責樓宇自控系統，EMS系統的設備，儀表，控制器，執行器，傳感器，電氣部件等的日常維護和故障排查。Responsible for maintenance and troubleshooting of building automation
system, EMS system, instruments, controllers, actuators, sensors, electrical
components, etc.
10. 監督第三方服務供應商的對系統的運行維護活動，確保系統（設備）按照有關的程序和GMP法規進行有效合理的維護。確保關鍵系統和設備始終處于符合規范的狀態。Supervise the 3rd party service provider for system operation and
maintain, ensure systems (equipment) are maintained in an appropriate way by
following relevant procedures and GMP regulations. Make sure critical systems
and equipment being maintained in qualified status all the time.
11. 支持項目改造活動，在機械相關的要求方面可以提出相關的技術規范要求，和接受的標準，比如設備，管道的材質要求，關鍵機械部件的選型，設備的安裝規范和運行性能滿足的標準。Support project transformation activities, in terms of
machinery-related requirements including the relevant technical
specifications requirements, and accepted standards, such as equipment,
piping material requirements, the selection of key mechanical components,
equipment installation specifications and operational performance to meet the
standards.
12. 確保相關的方面符合集團的指令要求和當?shù)胤ㄒ?guī)。Ensuring compliance
with corporate directives and local laws and regulations where appropriate.
13. 負責公用及空調系統可靠性提高，保持持續改進在節能方面達成節能目標。Responsible for utility & HVAC system’s reliability improvement, keep continuous improvement on energy
saving project to meet energy saving target.
14. 部門主管交辦的其他事項Other tasks assigned by head of department.
15. 確保所有暖通空調系統和潔凈公用系統相關的任務均符合質量，安全和衛生的要求。Ensure all HVAC system, clean utility system related tasks are in
compliance including quality, SHE requirements.
16. 維持所有設備的5S管理，包括但不僅限于公用設備，暖通空調系統的設備等。To maintain the good
5S conditions for all machinery, include but not limited to utility
equipment, HVAC equipment etc.
17. 負責并確保自有證書的復審，確保所有證書和資質有效。Responsible own
certification’s review process and ensure all the certifications are valid.
18. 完成直線經理交辦的其他工作。Other tasks assigned
by line manager.

Required
Knowledge and Skills職位要求：
1. 有2~3年廠務設施設備維護經驗。2~3 years experience
in facility maintenance.
2. 有使用MS Office辦公軟件，Excel,, Word的經驗.Experience with MS Office tools s.a. Excel,
Powerpoint, Word.
3. 熟悉空調系統和潔凈公用系統的工作原理，了解系統設計。Familiar with HVAC and
CU system operation principles, understanding of HVAC system design.
4. 熟悉機械相關的通用設備的結構及工作原理，豐富的機械維修和故障排查的工作經驗。Familiar with the structure and working principle of mechanical
related utility equipment, rich working experience in mechanical maintenance
and troubleshooting.
5. 熟悉故障根本原因分析方法論。Familiar with problem
solving methods
6. 項目管理技能。良好的理解調試和驗證過程與活動 Project management skills. Good
understanding of the commissioning and qualification process and activities

優先考慮：
1， 2~3年cGMP行業工作經驗。2~3 years experiences in a highly regulated cGMP manufacturing
environment.
2， 有2~3年廠務設施設備維護經驗。2~3 years experiences
in facility PM management
3， 有使用MS Office辦公軟件，Excel, Powerpoint, Word的經驗.Experience with MS Office tools s.a. Excel, Powerpoint, Word.
4， SAP 經驗SAP experience
5， 實現結果Achieving Results
6， 團隊精神和協作Teamwork and Collaboration
7， 激勵和影響Inspiring and Influencing

Qualifications
and Education 學歷資質:
1，中專學歷或者具有同等職業能力和知識Technical secondary school or have similar job/working
skills/knowledge
2，擁有低壓電工證，制冷證，鍋爐證Refrigeration, Electrician certificate, boiler
operation license.
優先考慮：
1，大專學歷 College
degree
2，擁有中級或高級技師證書Middle grade or senior technician certificate

原標題：《廠務運行電工》